6.0 Radar Module Connection & Settings
To change the system's activation behavior, configuration adjustments can be made to the radar module. Before
making radar module configuration changes, please note the following:
Detection range with factory default settings is typically at least 200 ft (60m)
•
•
Aiming the radar module downwards and/or toward the road slightly can result in later activation
Aiming the radar module upwards and/or farther up the road slightly can result in earlier activation
•
To make configuration changes, the following components are required:
Windows 7, 8 or 10 PC (32-or 64-bit versions are supported) running the Houston Radar Advanced Stats
•
Analyzer program (free download from https://www.houston-radar.com)
An available USB-A port on the PC
•
•
Radar Detection Programming Kit (provided), consisting of USB-to-Serial adapter and active USB
extension cable
Powered-up Carmanah E, F or G system with Radar Detection Kit installed and radar module connected
•
The radar module is powered by the Carmanah E, F or G system to which it is connected. To be
configured using the programming kit, the radar module must be connected to an operating
Carmanah E, F or G system.
More information about radar module settings can be found in the Houston Radar DR600 User
Manual available at https://www.houston-radar.com. To avoid unintended operation and/or
excessive power consumption, configuration changes should be limited to those discussed in this
section. Other settings should be left at their default values.
Contact Carmanah for assistance with any configuration settings not discussed in this manual.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
RADAR DETECTION KIT
|
carmanah.com
11
페이지 인쇄