Carmanah F Series 설치 매뉴얼 - 페이지 9

{카테고리_이름} Carmanah F Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah F Series 16 페이지. Rrfb mast arm kit
Carmanah F Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지), 사용자 설명서 (18 페이지), 교체 매뉴얼 (9 페이지), 설치 매뉴얼 (18 페이지)

페이지 인쇄
Carmanah F Series 설치 매뉴얼
8. Obtain 3" of red and 3" of black wire supplied with the kit.
•
Strip ends of both wires 0.35".
•
Use small flat bladed screwdriver to depress each terminal button and insert the wire into the
terminal.
•
Install one end of the red wire into the left BAT+ terminal.
•
Install one end of the black wire into the right BAT- terminal.
•
Insert the other end of each wire into two of the 5-position splice terminals.
9. Route the two red battery harness wires into the splice terminal with the red wire from BAT+.
10. Route the two black battery harness wires into the splice terminal with the black wire BAT-.
Make sure all wire strands go into the terminal hole.
11. Obtain 3" of red wire supplied with the kit and strip both ends to 0.35".
12. Insert one end of 3" red wire into PBS+ terminal.
13. Route modified AI harness wires (from steps 1-4, violet/blue/black/red/yellow) into the hole shown.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
APPLIED INFORMATION (AI) INTEGRATION
INSTALL GUIDE
9
|
carmanah.com