Carmanah F Series 설치 매뉴얼 - 페이지 10

{카테고리_이름} Carmanah F Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmanah F Series 16 페이지. Rrfb mast arm kit
Carmanah F Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 에너지 관리 시스템 교체 매뉴얼 (12 페이지), 설치 매뉴얼 (20 페이지), 사용자 설명서 (18 페이지), 교체 매뉴얼 (9 페이지), 설치 매뉴얼 (18 페이지)

14. Install the wires into the terminals as follows:

•

Violet → 3-position splice terminal with red wire going to PBS+

•

Blue → EXT1

•

Red → Middle BAT+

•

Black → Middle BAT-

15. Align ends of heat-shrink on both harnesses near end of sheet metal tab. Install a cable tie around both

harness and sheet metal as shown below

If the system has a pushbutton, insert the positive pushbutton wire into the empty position of the

3-positio splice terminal.

16. Remove red solar panel wire from the PV+ terminal. Insert red wire into 3-position splice terminal.

17. Insert one end of 3" yellow wire from step 2 into PV+ terminal. Insert other end of 3" yellow wire into 3-

position splice terminal.

18. Insert yellow wire from AI 16-pin harness into third splice terminal position.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com