Carmanah F Series Install Manual - Page 10

Browse online or download pdf Install Manual for Construction Equipment Carmanah F Series. Carmanah F Series 16 pages. Rrfb mast arm kit
Also for Carmanah F Series: Quick Start Manual (20 pages), Install Manual (20 pages), Energy Management System Replacement Manual (12 pages), Install Manual (20 pages), User Manual (18 pages), Replacement Manual (9 pages), Install Manual (18 pages)

Print Page
Carmanah F Series Install Manual
14. Install the wires into the terminals as follows:
•
Violet → 3-position splice terminal with red wire going to PBS+
•
Blue → EXT1
•
Red → Middle BAT+
•
Black → Middle BAT-
15. Align ends of heat-shrink on both harnesses near end of sheet metal tab. Install a cable tie around both
harness and sheet metal as shown below
If the system has a pushbutton, insert the positive pushbutton wire into the empty position of the
3-positio splice terminal.
16. Remove red solar panel wire from the PV+ terminal. Insert red wire into 3-position splice terminal.
17. Insert one end of 3" yellow wire from step 2 into PV+ terminal. Insert other end of 3" yellow wire into 3-
position splice terminal.
18. Insert yellow wire from AI 16-pin harness into third splice terminal position.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
APPLIED INFORMATION (AI) INTEGRATION
INSTALL GUIDE
10
|
carmanah.com