Aleo S19 LK235 빠른 참조 매뉴얼 - 페이지 10

{카테고리_이름} Aleo S19 LK235에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleo S19 LK235 20 페이지.

9.4

Lightning protection

9.4
Lightning protection
9.4
9.4
9.4
9.4
9.4
Lightning protection
Lightning protection
Lightning protection
Lightning protection
9.4
Lightning protection
WARNING!
WARNING!
Lightning protection
9.4
9.4
Lightning protection
Lightning protection
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
9.4
Lightning protection
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Risk of fire or electric shock!
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Risk of fire or electric shock!
Risk of fire or electric shock!
WARNING!
WARNING!
WARNING!
Risk of fire or electric shock!
Risk of fire or electric shock!
Risk of fire or electric shock!
Risk of fire or electric shock!
• Leave the planning and installation of the external,
WARNING!
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
and if required internal, lightning protection to be
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
Absence of or inadequate lightning protection.
and if required internal, lightning protection to be
and if required internal, lightning protection to be
carried out by qualified technicians at all times.
and if required internal, lightning protection to be
and if required internal, lightning protection to be
and if required internal, lightning protection to be
and if required internal, lightning protection to be
Absence of or inadequate lightning protection.
Risk of fire or electric shock!
Risk of fire or electric shock!
Risk of fire or electric shock!
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
• It is essential to integrate an arrestor for connecting
Risk of fire or electric shock!
Leave the planning and installation of the external,
• Leave the planning and installation of the external,
• Leave the planning and installation of the external,
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
the lightning rod with the lightning protection. This
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
• Leave the planning and installation of the external,
and if required internal, lightning protection to be
and if required internal, lightning protection to be
and if required internal, lightning protection to be
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
ensures the safety and reliability of the lightning pro-
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
and if required internal, lightning protection to be
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
carried out by qualified technicians at all times.
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning
tection as well as the photovoltaic system.
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning pro-
carried out by qualified technicians at all times.
It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
• It is essential to integrate an arrestor for connecting
tection as well as the photovoltaic system.
protection as well as the photovoltaic system.
tection as well as the photovoltaic system.
tection as well as the photovoltaic system.
tection as well as the photovoltaic system.
tection as well as the photovoltaic system.
• Do not under any circumstances include the module
• It is essential to integrate an arrestor for connecting
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
the lightning rod with the lightning protection. This
• Do not under any circumstances include the module
frame or its earth as an active part of the lightning
• Do not under any circumstances include the module
• Do not under any circumstances include the module
• Do not under any circumstances include the module
• Do not under any circumstances include the module
• Do not under any circumstances include the module
• Do not under any circumstances include the module
the lightning rod with the lightning protection. This
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning pro-
ensures the safety and reliability of the lightning pro-
frame or its earth as an active part of the lightning
protection (e.g. as a lightning arrestor).
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
ensures the safety and reliability of the lightning pro-
tection as well as the photovoltaic system.
tection as well as the photovoltaic system.
tection as well as the photovoltaic system.
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
tection as well as the photovoltaic system.
Do not under any circumstances include the module
• Do not under any circumstances include the module
• Do not under any circumstances include the module
_______________________________________________
NOTE
• Do not under any circumstances include the module
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
frame or its earth as an active part of the lightning
NOTE
NOTE
NOTE
NOTE
NOTE
NOTE
frame or its earth as an active part of the lightning
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
protection (e.g. as a lightning arrestor).
If you earth the module frame, the only task of this
protection (e.g. as a lightning arrestor).
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
earth is the potential equalisation between the mod-
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
earth is the potential equalisation between the mod-
ule frame and the supporting structure.
earth is the potential equalisation between the mo-
NOTE
earth is the potential equalisation between the mod-
earth is the potential equalisation between the mod-
earth is the potential equalisation between the mod-
NOTE
earth is the potential equalisation between the mod-
NOTE
ule frame and the supporting structure.
NOTE
dule frame and the supporting structure.
ule frame and the supporting structure.
ule frame and the supporting structure.
ule frame and the supporting structure.
ule frame and the supporting structure.
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
If you earth the module frame, the only task of this
10

Details of mechanical mounting

If you earth the module frame, the only task of this
earth is the potential equalisation between the mod-
earth is the potential equalisation between the mod-
earth is the potential equalisation between the mod-
10
Details of mechanical mounting
10
Details of mechanical mounting
10
10
10
10
Details of mechanical mounting
Details of mechanical mounting
Details of mechanical mounting
Details of mechanical mounting
10
earth is the potential equalisation between the mod-
ule frame and the supporting structure.
ule frame and the supporting structure.
ule frame and the supporting structure.
ule frame and the supporting structure.
10.1

Aligning the mounting profiles

10.1 Aligning the mounting profiles
10.1
Aligning the mounting profiles
10.1
10.1
10.1
10.1
10.1
Aligning the mounting profiles
Aligning the mounting profiles
Aligning the mounting profiles
Aligning the mounting profiles
Details of mechanical mounting
10
10
Details of mechanical mounting
Details of mechanical mounting
10
Details of mechanical mounting
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
Aligning the mounting profiles
10.1
10.1
Aligning the mounting profiles
Aligning the mounting profiles
10.1
Aligning the mounting profiles
Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
10.1.1 Permissible alignment
a
a
a
a
a
a
Fig.3
Permissible alignment of mounting profiles
Fig.3 Permissible alignment of mounting profiles
Fig.3
Permissible alignment of mounting profiles
Fig.3
Fig.3
Fig.3
Fig.3
Fig.3
Permissible alignment of mounting profiles
Permissible alignment of mounting profiles
Permissible alignment of mounting profiles
Permissible alignment of mounting profiles
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b:
Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
fingers of a mounting system.
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
a
fingers of a mounting system.
a
b
a
fingers of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
a
Permissible alignment of mounting profiles
Fig.3
Fig.3
Permissible alignment of mounting profiles
Permissible alignment of mounting profiles
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
Fig.3
Permissible alignment of mounting profiles
arallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
a, b: Parallel profiles for mounting; c: Parallel, aligned
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
a, b: Parallel profiles for mounting; c: Parallel, aligned
of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
fingers of a mounting system.
Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
10.1.2 Impermissible alignment
a
a
Fig.4
Impermissible alignment of mounting profiles
a
a
a
a
Fig.4
Impermissible alignment of mounting profiles
Fig.4
Fig.4
Fig.4
Fig.4
Fig.4
Impermissible alignment of mounting profiles
Impermissible alignment of mounting profiles
Impermissible alignment of mounting profiles
Impermissible alignment of mounting profiles
a: Profiles not parallel to one another; b: Profiles neither par-
Fig.4 Impermissible alignment of mounting profiles
a: Profiles not parallel to one another; b: Profiles neither par-
allel nor perpendicular to the module edges; c: The profile
a: Profiles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
a
a
b
a
a :
Profiles not parallel to one another;
allel nor perpendicular to the module edges; c: The profile
ends for the sides of a module are not connected.
allel nor perpendicular to the module edges; c: The profile
allel nor perpendicular to the module edges; c: The profile
allel nor perpendicular to the module edges; c: The profile
allel nor perpendicular to the module edges; c: The profile
allel nor perpendicular to the module edges; c: The profile
a
Impermissible alignment of mounting profiles
Fig.4
Fig.4
Impermissible alignment of mounting profiles
Impermissible alignment of mounting profiles
ends for the sides of a module are not connected.
b :
Profiles neither parallel nor perpendicular to the
ends for the sides of a module are not connected.
ends for the sides of a module are not connected.
ends for the sides of a module are not connected.
ends for the sides of a module are not connected.
ends for the sides of a module are not connected.
Fig.4
Impermissible alignment of mounting profiles
iles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
a: Profiles not parallel to one another; b: Profiles neither par-
module edges;
a: Profiles not parallel to one another; b: Profiles neither par-
allel nor perpendicular to the module edges; c: The profile
allel nor perpendicular to the module edges; c: The profile
c:
The profile ends for the sides of a module are not
allel nor perpendicular to the module edges; c: The profile
or the sides of a module are not connected.
ends for the sides of a module are not connected.
ends for the sides of a module are not connected.
connected.
ends for the sides of a module are not connected.
Page 10/19
Page 10/19
Page 10/19
Page 10/19
Page 10/19
Page 10/19
Page 10/19
Page 10/19
10.1
Lightning protection
10.1.1 Permissible alignment
WARNING!
Absence of or inadequate lightning protection.
Risk of fire or electric shock!
and if required internal, lightning protection to be
carried out by qualified technicians at all times.
Fig.3
the lightning rod with the lightning protection. This
ensures the safety and reliability of the lightning pro-
a, b: Parallel profiles for mounting; c: Parallel, aligned
tection as well as the photovoltaic system.
fingers of a mounting system.
10.1.2 Impermissible alignment
frame or its earth as an active part of the lightning
protection (e.g. as a lightning arrestor).
NOTE
If you earth the module frame, the only task of this
earth is the potential equalisation between the mod-
ule frame and the supporting structure.
Fig.4
Details of mechanical mounting
a: Profiles not parallel to one another; b: Profiles neither par-
allel nor perpendicular to the module edges; c: The profile
ends for the sides of a module are not connected.
Aligning the mounting profiles
Page 10/19
b
c
b
c
a
b
b
b
b
b
c
c
c
c
GID AS022b
GID AS022b
Permissible alignment of mounting profiles
b
c
b
c
GID AS022b
b
c
GID AS022b
b
c
GID AS023b
b
c
a
b
GID AS023b
b
b
b
b
c
c
c
c
GID AS023b
GID AS023b
GID AS023b
Impermissible alignment of mounting profiles
b
c
b
c
c
GID AS023b
GID AS023b
b
c
GID AS023b
10.2
Aligning the mounting profiles
10.2
10.2
10.2
10.2
10.2
Clamp mounting for modules with standard
Clamp mounting for modules with standard
Clamp mounting for modules with standard
10.2
frames
frames
frames
frames
10.2
Clamp mounting for modules with standard
10.2
10.2
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2
Clamp mounting for modules with standard
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
frames
frames
Permissible arrangement
Permissible arrangement
Permissible arrangement
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
10.2.1 Arranging the clamps
Permissible arrangement
Permissible arrangement
a
b
Permissible alignment of mounting profiles
Fig.5
GID AS024a
GID AS024a
GID AS024a
Fig.5
Fig.5
Fig.5
Fig.5
Fig.5
Fig.5 55 Permissible clamp arrangement for framed
a: Symmetrical clamping on the long sides, b: Asymmetrical
a
GID AS024a
a: Symmetrical clamping on the long sides, b: Asymmetrical
GID AS024a
clamping on the long sides (acceptable for certain load
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
a :
Fig.5
55Permissible clamp arrangement for framed
Fig.5
Fig.5
GID AS024a
clamping on the long sides (acceptable for certain load
levels), c: Symmetrical clamping on the short sides.
clamping on the long sides (acceptable for certain load
clamping on the long sides (acceptable for certain load
clamping on the long sides (acceptable for certain load
clamping on the long sides (acceptable for certain load
modules
Fig.5
levels), c: Symmetrical clamping on the short sides.
b :
levels), c: Symmetrical clamping on the short sides.
levels), c: Symmetrical clamping on the short sides.
levels), c: Symmetrical clamping on the short sides.
levels), c: Symmetrical clamping on the short sides.
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
a: Symmetrical clamping on the long sides, b: Asymmetrical
clamping on the long sides (acceptable for certain load
clamping on the long sides (acceptable for certain load
clamping on the long sides (acceptable for certain load
c :
Impermissible arrangement
Impermissible arrangement
Impermissible arrangement
clamping on the long sides (acceptable for certain load
levels), c: Symmetrical clamping on the short sides.
levels), c: Symmetrical clamping on the short sides.
levels), c: Symmetrical clamping on the short sides.
d :
levels), c: Symmetrical clamping on the short sides.
a
b
Impermissible arrangement
Impermissible alignment of mounting profiles
Impermissible arrangement
Fig.6
GID AS025b
GID AS025b
GID AS025b
Fig.6
Fig.6
Fig.6
Fig.6
Fig.6
a
GID AS025b
GID AS025b
Impermissible clamp arrangement for framed modules
Fig.6
55Impermissible clamp arrangement for framed
Fig.6
Fig.6
GID AS025b
Impermissible clamp arrangement for framed modules
Fig.6 55 Impermissible clamp arrangement for framed
(1)a: Missing clamps, b, c: Clamping on both short and long
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules
modulesPermissible clamp arrangement for
Fig.6
(1)a: Missing clamps, b, c: Clamping on both short and long
sides.
(1)a: Missing clamps, b, c: Clamping on both short and long
(1)a: Missing clamps, b, c: Clamping on both short and long
(1)a: Missing clamps, b, c: Clamping on both short and long
(1)a: Missing clamps, b, c: Clamping on both short and long
framed modules
sides.
sides.
sides.
sides.
sides.
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules
Impermissible clamp arrangement for framed modules (1)
Impermissible clamp arrangement for framed modules
(1)a: Missing clamps, b, c: Clamping on both short and long
(1)a: Missing clamps, b, c: Clamping on both short and long
(1)a: Missing clamps, b, c: Clamping on both short and long
a :
(1)a: Missing clamps, b, c: Clamping on both short and long
sides.
sides.
sides.
GID AS022b
b :
sides.
GID AS022b
c
GID AS022b
GID AS022b
GID AS022b
c
GID AS022b
GID AS022b
Fig.7
GID AS069b
GID AS069b
GID AS069b
Fig.7
Fig.7
Fig.7
Fig.7
Fig.7
d: Protruding clamps, e: Opposing clamps have different
d
GID AS069b
GID AS069b
d: Protruding clamps, e: Opposing clamps have different
distances to the module corners, f: Asymmetrical clamps on
d: Protruding clamps, e: Opposing clamps have different
d: Protruding clamps, e: Opposing clamps have different
d: Protruding clamps, e: Opposing clamps have different
d: Protruding clamps, e: Opposing clamps have different
Fig.7
Impermissible clamp arrangement for framed
Fig.7
Fig.7
GID AS069b
distances to the module corners, f: Asymmetrical clamps on
the short sides.
distances to the module corners, f: Asymmetrical clamps on
distances to the module corners, f: Asymmetrical clamps on
distances to the module corners, f: Asymmetrical clamps on
distances to the module corners, f: Asymmetrical clamps on
modules (2)
Fig.7
Fig.7 Impermissible clamp arrangement for framed
the short sides.
the short sides.
the short sides.
the short sides.
the short sides.
d: Protruding clamps, e: Opposing clamps have different
d: Protruding clamps, e: Opposing clamps have different
d: Protruding clamps, e: Opposing clamps have different
10.2.2 Clamp dimensions
d: Protruding clamps, e: Opposing clamps have different
distances to the module corners, f: Asymmetrical clamps on
distances to the module corners, f: Asymmetrical clamps on
distances to the module corners, f: Asymmetrical clamps on
10.2.2 Clamp dimensions
d:
10.2.2 Clamp dimensions
10.2.2 Clamp dimensions
10.2.2 Clamp dimensions
10.2.2 Clamp dimensions
distances to the module corners, f: Asymmetrical clamps on
the short sides.
the short sides.
the short sides.
Observe the following information for clamp lengths and
e:
the short sides.
Observe the following information for clamp lengths and
depths.
Observe the following information for clamp lengths and
Observe the following information for clamp lengths and
Observe the following information for clamp lengths and
Observe the following information for clamp lengths and
c
GID AS023b
GID AS023b
10.2.2 Clamp dimensions
10.2.2 Clamp dimensions
10.2.2 Clamp dimensions
depths.
depths.
depths.
depths.
depths.
f :
10.2.2 Clamp dimensions
Observe the following information for clamp lengths and
Observe the following information for clamp lengths and
Observe the following information for clamp lengths and
GID AS023b
10.2.2 Clamp dimensions
Observe the following information for clamp lengths and
depths.
depths.
depths.
depths.
Observe the following information for clamp lengths and
depths.
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]
Clamp mounting for modules with standard
Clamp mounting for modules with standard
10.2
Clamp mounting for modules with standard
Clamp mounting for modules with standard
Clamp mounting for modules with standard
frames
frames
frames
frames
Clamp mounting for modules with standard
Clamp mounting for modules with standard
10.2.1 Arranging the clamps
frames
frames
Permissible arrangement
Permissible arrangement
Permissible arrangement
Permissible arrangement
Permissible arrangement
Permissible arrangement
Permissible arrangement
c
GID AS022b
a
b
GID AS024a
a
b
a
a
a
a
a
b
b
b
b
55Permissible clamp arrangement for framed
GID AS024a
GID AS024a
GID AS024a
55Permissible clamp arrangement for framed
modules
Fig.5
55Permissible clamp arrangement for framed
55Permissible clamp arrangement for framed
55Permissible clamp arrangement for framed
55Permissible clamp arrangement for framed
55Permissible clamp arrangement for framed
modules
modules
modules
modules
modules
modules
modules
a
b
a
b
c
b
GID AS024a
a: Symmetrical clamping on the long sides, b: Asymmetr
a
b
Symmetrical clamping on the long sides,
55Permissible clamp arrangement for framed
55Permissible clamp arrangement for framed
clamping on the long sides (acceptable for certain load
55Permissible clamp arrangement for framed
modules
modules
Asymmetrical clamping on the long sides
levels), c: Symmetrical clamping on the short sides.
modules
(acceptable for certain load levels),
Impermissible arrangement
Impermissible arrangement
Symmetrical clamping on the short sides.
Impermissible arrangement
Impermissible arrangement
Clamping on both short and long sides.
c
GID AS023b
Impermissible arrangement
Impermissible arrangement
Impermissible arrangement
a
b
GID AS025b
a
b
a
GID AS025b
a
a
a
a
b
b
b
b
55Impermissible clamp arrangement for framed
GID AS025b
GID AS025b
55Impermissible clamp arrangement for framed
modulesPermissible clamp arrangement for
Fig.6
55Impermissible clamp arrangement for frame
55Impermissible clamp arrangement for framed
55Impermissible clamp arrangement for framed
55Impermissible clamp arrangement for framed
55Impermissible clamp arrangement for framed
modulesPermissible clamp arrangement for
framed modules
modulesPermissible clamp arrangement for
modulesPermissible clamp arrangement for
modulesPermissible clamp arrangement for
modulesPermissible clamp arrangement for
modulesPermissible clamp arrangement for
framed modules
a
b
a
b
c
b
framed modules
framed modules
framed modules
framed modules
GID AS025b
framed modules
a
b
55Impermissible clamp arrangement for framed
55Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed modules
modulesPermissible clamp arrangement for
modulesPermissible clamp arrangement for
55Impermissible clamp arrangement for framed
modulesPermissible clamp arrangement for
(1)a: Missing clamps, b, c: Clamping on both short and l
framed modules
framed modules
modulesPermissible clamp arrangement for
framed modules
sides.
framed modules
Missing clamps,
Clamping on both short and long sides.
d
e
GID AS069b
d
e
GID AS069b
d
d
d
d
d
e
e
e
e
Impermissible clamp arrangement for framed
GID AS069b
GID AS069b
Impermissible clamp arrangement for framed
modules (2)
Fig.7
Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed
modules (2)
modules (2)
modules (2)
modules (2)
modules (2)
modules (2)
d
e
d
e
f
e
GID AS069b
d: Protruding clamps, e: Opposing clamps have differen
d
e
Impermissible clamp arrangement for framed
Impermissible clamp arrangement for framed
distances to the module corners, f: Asymmetrical clamps
modules (2)
modules (2)
Impermissible clamp arrangement for framed
the short sides.
modules (2)
modules (2)
Protruding clamps,
10.2.2 Clamp dimensions
Opposing clamps have
Observe the following information for clamp lengths and
different distances to the module corners,
depths.
Asymmetrical clamps on the short sides.
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | info@aleo-sola
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-DE (1)
Quick Reference Manual Rel. 4.2, 08/2015, en-GB-DE (1)
a
GID AS025b
Fig.6
55Impermissible cl
modulesPermissible
framed modules
Impermissible clamp arrange
(1)a: Missing clamps, b, c: Cl
sides.
c
c
b
c
c
c
c
d
c
GID AS069b
Fig.7
Impermissible clam
modules (2)
c
c
d: Protruding clamps, e: Opp
c
distances to the module corn
the short sides.
10.2.2 Clamp dimensions
Observe the following inform
depths.
c
c
b
c
c
c
c
c
c
c
c
aleo solar GmbH | Marius-Eriksen-Straße 1 | 1
f
f
e
f
f
f
f
f
f
f
f
Quick Reference Manual Rel. 3.0, 07/2014, en-GB-
b
e
Quick Re