Carmelli NG1022M 조립 지침 매뉴얼 - 페이지 6

{카테고리_이름} Carmelli NG1022M에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmelli NG1022M 16 페이지. 3-in-1 flip table
Carmelli NG1022M에 대해서도 마찬가지입니다: 어셈블리 지침 (18 페이지)

페이지 인쇄

ASSEMBLY INSTRUCTIONS

THANK YOU!

STEP 1 - ASSEMBLE THE LEGS

1. Select one of the leg pieces (#9 or #10) and lay it flat on the floor. Do not bend the hinge

in the leg backwards. Damage to the outer surface will occur.

2. Position three of the "L" shaped steel brackets (#39) on one side of the leg. Use three

screws (#43) to attach the brackets to the leg. Close (fold) the leg and use three screws

(#43) to secure the brackets. Tighten the screws.

3. Place a leg base (#11) at the bottom and insert three screws (#25) into the holes. The

pressed in nut must be facing out away from the leg.

4. Tighten the screws.

5. Screw a leg leveler (#13) half way into the leg base.

6. Repeat for the remaining three legs.

The nut side must

be facing upwards