Carmelli NG1022M 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} Carmelli NG1022M에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carmelli NG1022M 16 페이지. 3-in-1 flip table
Carmelli NG1022M에 대해서도 마찬가지입니다: 어셈블리 지침 (18 페이지)

페이지 인쇄

ASSEMBLY INSTRUCTIONS (CONT.)

THANK YOU!

STEP 4 - ASSEMBLE LEGS TO END PANELS

1. Insert four barrel nuts (#22) into the left and right holes of an end panel (#3). Attach a left

leg (#9) and a right leg (#10) to an end panel (#3) using two bolts (#16) per leg.

2. Attach a leg panel (#8) to the legs and secure it using four screws (#24) per leg panel.

3. Repeat steps 1 and 2 to assemble the other apron and legs.

STEP 5 - ATTACH LEG BRACES

1. Insert four barrel nuts (#23) into the holes of the leg braces (#7) as shown. Attach the leg

braces (#7) between the assembled legs using four washers (#21) and four bolts (#17)

per leg brace.

Note：MAKE SURE THAT ALL CONNECTIONS

ARE PROPERLY ASSEMBLED