ATI Technologies 39-0220 운영 - 페이지 13

{카테고리_이름} ATI Technologies 39-0220에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. ATI Technologies 39-0220 15 페이지.

Unoccupied Stalls and Cows without Tags.

In these situations the Auto-ID control cannot obtain a valid tag read and will require immediate attention. The system will

read and feed properly tagged cows up to the vacant stall or untagged cow then Scanning will cease.

Proceed as follows:

Press the Scanning Switch fitted to the bottom of the control; This will start the scanning process.

Starting at stall(1), the MicroMarque3S will attempt to read an ear tag at each stall on that side. The stall

being read currently will be displayed in the STALL/SIDE window and the message 'ScAn' will

flash in the Cumulative Totals window.

With each successful tag read, the MicroMarque3S will access the cow's record and deliver the appropriate

amount of feed.

The scanning process will cease when the system encounters an empty stall or a cow without an ear tag- an

unsuccessful read. Indicate that you have recognised the problem by:

Press STEP key. The system will 'remember' that there is a fault at that stall and continue to scan and

deliver feed to the remaining stalls. When scanning is complete, the message 'ScAn End' will be

displayed:

Press the ATTN key. The display will now have 3 underscore prompts in the COW

NUMBER window, the message 'ntg' (No Tag) in the RATION window and the stall at which the

unsuccessful read occurred in the STALL/SIDE window.

Three options are now available:

1: If the stall is occupied by an untagged cow that has a record, its number may be keyed in and it

will be fed in the usual way.

2: If the stall is occupied by an untagged cow that does NOT have a record, it may be fed a ration

keyed into the control. However, the ration value will be added to the Cumulative Feed Total only.

3: If the stall is unoccupied or occupied by a cow that does not require feeding, it may be skipped.

These options are detailed on the following page.

Cow

Program

HERRINGBONE

AUTO-ID

OPERATION: 8

Shift

Cumulative Totals

Step

Attn

Ration

Yield/Flags

RESET

Cancel

The buzzer will NOT sound for a

stepped stall.

Stall/Side

DELETE

Change