Andersen 40 STE 매뉴얼 - 페이지 14

{카테고리_이름} Andersen 40 STE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 40 STE 17 페이지. 2+1 speed
Andersen 40 STE에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)

7. Remove the second freewheeling ratchet gear (18) as in step 6 by removing shaft

(16).

8. For base covers (19) in stainless steel remove the

base cover (19) by removing the screws holding

the base cover to the lower base (14). For base

covers (19) in PETP plastic carefully tap the base

cover (19) from the lower base (14) with a

rubber/plastic hammer.

(Figure 5).

9. Reassemble the winch with the new lower base by

reversing the procedure above from 8-3 remembering to apply grease to moving

parts.

10. Your winch is ready to be mounted on your new above deck compact motor.

Selftailing

arm

Gears

Gear

axles

Base Cover

Figure 12: Principle photo of parts in a 58-62ST ANDERSEN Winch

Page 14 of 17

Figure 11

Drum

Upper

base

Bearing

Drive

Shaft

Lower base