Andersen 40 STE Manuel - Sayfa 14

Vinçler Andersen 40 STE için çevrimiçi göz atın veya pdf Manuel indirin. Andersen 40 STE 17 sayfaları. 2+1 speed
Ayrıca Andersen 40 STE için: Manuel (8 sayfalar)

Sayfayı Yazdır
Andersen 40 STE Manuel
7. Remove the second freewheeling ratchet gear (18) as in step 6 by removing shaft
(16).
8. For base covers (19) in stainless steel remove the
base cover (19) by removing the screws holding
the base cover to the lower base (14). For base
covers (19) in PETP plastic carefully tap the base
cover (19) from the lower base (14) with a
rubber/plastic hammer.
(Figure 5).
9. Reassemble the winch with the new lower base by
reversing the procedure above from 8-3 remembering to apply grease to moving
parts.
10. Your winch is ready to be mounted on your new above deck compact motor.
Selftailing
arm
Gears
Gear
axles
Base Cover
Figure 12: Principle photo of parts in a 58-62ST ANDERSEN Winch
Page 14 of 17
Figure 11
Drum
Upper
base
Bearing
Drive
Shaft
Lower base