Andersen 78FS 매뉴얼 - 페이지 2
{카테고리_이름} Andersen 78FS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 78FS 7 페이지.
페이지 인쇄
GENERAL INFORMATION
Due to the best choice of materials and high precision in manufacturing, we recommend, for
normal use, only to dismantle, clean and lubricate the winch once every second year. Under
extensive use, such as racing, charter or blue water sailing, we recommend to lubricate the winch
once every year.
We strongly recommend always to use ANDERSEN WINCH GREASE, when lubricating your
winch. ANDERSEN WINCH GREASE is a high quality silicone/Teflon grease product.
Most other types of grease, including "marine grease" are not suitable for lubrication of winches.
Non-suitable grease products can cause malfunction, which could result in fatal injuries for the
user and others.
Pawl arm springs should be replaced every second year. Spare arm springs and other parts that
may be required are included in the ANDERSEN Service Kit. Please refer to the service instruction
for the Service Kit suitable for the specific winch.
When the winch handle is not in use but the winch is under load, we recommend, from a safety
point of view, to remove the winch handle from the winch.
To ensure correct function of the selftailing unit, only use recommended line sizes. When using
the winch with mooring lines DO NOT use the selftailing function and be sure that the mooring line
is not in contact with the selftailing arm.
To ensure the best possible functioning of the winch, we recommend that the winch is placed in
accordance with the line entry shown below.
Be also aware that selftailing arm is positioned correctly. We recommend to have the selftailing
arm positioned within the shaded area. On 12ST and 28ST the position of the selftailing arm is
fixed, making it very important to establish the proper location of the holes prior to drilling these in
the deck. On all other models, the selftailing arm can be placed in several different positions after
having installed the winch.