Advanced Kiosks Outdoor Monolith 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Advanced Kiosks Outdoor Monolith에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Kiosks Outdoor Monolith 20 페이지.
페이지 인쇄Computer Power and Location
The power required to operate the Monolith Kiosk is standard US wall plug 120v with grounding.
The kiosk itself runs off of one 12v power brick per computer, which all connects to the surge
protector, as well as the monitor. The kiosk is set to automatically turn on when plugged into a
power source. If this setting changes, or you need to manually power off the device, then the power
button to turn the kiosk on and off is located on the front of the PC.
Kiosk Power
Box
Inside of Enclosure with Components
A certified electrician needs to be used if the power box is going to be hard wired into a power
source.
The cable should be concealed using appropriate conduit or similar material from the power box
to the kiosk so no one can trip or tamper with the cord.
The power cable (as well as Ethernet cable) needs to be run up from the bottom of the kiosk, so
no wires are exposed.
Computer
The 2 computers will be secured in the kiosk, located in the Water-Resistant Enclosure. There
are normally around six cables that will be plugged into the computer. Ensure all are plugged in
completely and shipping has not vibrated any loose.
Outdoor Monolith Kiosk Assembly and Operation Instructions
5
www.advancedkiosks.com
Internal
Computer
12/16/2020