Advanced Kiosks Outdoor Monolith Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Digital Signage Advanced Kiosks Outdoor Monolith. Advanced Kiosks Outdoor Monolith 20 stron.

Computer Power and Location

The power required to operate the Monolith Kiosk is standard US wall plug 120v with grounding.

The kiosk itself runs off of one 12v power brick per computer, which all connects to the surge

protector, as well as the monitor. The kiosk is set to automatically turn on when plugged into a

power source. If this setting changes, or you need to manually power off the device, then the power

button to turn the kiosk on and off is located on the front of the PC.

Kiosk Power

Box

Inside of Enclosure with Components

A certified electrician needs to be used if the power box is going to be hard wired into a power

source.

The cable should be concealed using appropriate conduit or similar material from the power box

to the kiosk so no one can trip or tamper with the cord.

The power cable (as well as Ethernet cable) needs to be run up from the bottom of the kiosk, so

no wires are exposed.

The 2 computers will be secured in the kiosk, located in the Water-Resistant Enclosure. There

are normally around six cables that will be plugged into the computer. Ensure all are plugged in

completely and shipping has not vibrated any loose.

Outdoor Monolith Kiosk Assembly and Operation Instructions

www.advancedkiosks.com

Internal

Computer

12/16/2020