Communications Specialties DEUCE HD 사용자 설명서 - 페이지 4

{카테고리_이름} Communications Specialties DEUCE HD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Communications Specialties DEUCE HD 13 페이지. Intelligent video scaler

페이지 인쇄

INSTALLATION STEPS:

Connect the provided AC power cord into the connector marked Power on the rear of Deuce HD and plug

the other end into an AC outlet. This is an auto-sensing universal input power supply and is compatible with

worldwide standards.

Connect a video source to either the COMPOSITE, S-VIDEO or COMPONENT input on the rear panel.

Connect a computer monitor, projector or display to the VGA compatible connector on the rear panel.

AVAILABLE OUTPUTS:

There are three outputs configurations available on the output VGA connector: RGBHV, RGBS and Y-C

rear panel switch next to the output connector selects one of the three output types. The individual signals on the

HD-15 connector are defined on page 7. Rear connector pin-outs for the output configuration are selected by this

switch.

REMOTE CONTROL:

Deuce HD provides for a hard-wired RS-232 remote control connection using a 3-pin Phoenix-type connector on the

rear panel. The baud rate is 9600 baud, no parity, 1 start bit, 1 stop bit. The pin out is as follows:

Please contact the sales department at Communications Specialties or our web site at www.commspecial.com for

detailed specifications on the command structure for this remote control part.

INSTALLATION

1 - Ground

2 - Receive Data

Deuce HD User's Manual

3 - Transmit Data

-C

. The

Page 3