Communications Specialties DEUCE HD Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Communications Specialties DEUCE HD. Communications Specialties DEUCE HD 13 pagina's. Intelligent video scaler

Pagina afdrukken
INSTALLATION STEPS:
1.
Connect the provided AC power cord into the connector marked Power on the rear of Deuce HD and plug
the other end into an AC outlet. This is an auto-sensing universal input power supply and is compatible with
worldwide standards.
2.
Connect a video source to either the COMPOSITE, S-VIDEO or COMPONENT input on the rear panel.
3.
Connect a computer monitor, projector or display to the VGA compatible connector on the rear panel.
AVAILABLE OUTPUTS:
There are three outputs configurations available on the output VGA connector: RGBHV, RGBS and Y-C
rear panel switch next to the output connector selects one of the three output types. The individual signals on the
HD-15 connector are defined on page 7. Rear connector pin-outs for the output configuration are selected by this
switch.
REMOTE CONTROL:
Deuce HD provides for a hard-wired RS-232 remote control connection using a 3-pin Phoenix-type connector on the
Deuce HD provides for a hard-wired RS-232 remote control connection using a 3-pin Phoenix-type connector on the
rear panel. The baud rate is 9600 baud, no parity, 1 start bit, 1 stop bit. The pin out is as follows:
l
l
rear panel. The baud rate is 9600 baud, no parity, 1 start bit, 1 stop bit. The pin out is as follows:
1
2
Please contact the sales department at Communications Specialties or our web site at www.commspecial.com for
detailed specifications on the command structure for this remote control part.

INSTALLATION

l
3
1 - Ground
2 - Receive Data
1
Deuce HD User's Manual
3 - Transmit Data
2
3
-C
. The
B
R
Page 3