Bosch PSR Select WEU 원본 사용 설명서 - 페이지 15

{카테고리_이름} Bosch PSR Select WEU에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch PSR Select WEU 21 페이지.

OBJ_BUCH-1564-001.book Page 31 Thursday, December 15, 2011 8:36 AM

Inserting Screwdriver Bits into the Bit Magazine

(see figure B–C)

When changing the application tool, wear safety goggles. Do not

stare directly into the tool holder. When changing the tool insert, it

can be thrown out toward the front.

Only insert one screwdriver bit per chamber into the bit magazine.

Use only short standard screwdriver bits. Longer screwdriver bits

cannot be loaded into the bit magazine.

– Turn the bit magazine 11 until an empty chamber can be seen in view-

ing window 3.

– Push the sliding switch 7 toward the front.

– Insert the screwdriver bit 1 directly into the tool holder 2.

– Push the sliding switch 7 to the rear to load the screwdriver bit 1 into

bit magazine 11.

– As soon as you push the sliding switch 7 to the rear or actuate the

On/Off switch 10 when in the rear position, the bit magazine 11 is illu-

minated for approx. 20 seconds.

Changing the Tool (see figure D)

When changing the application tool, wear safety goggles. Do not

stare directly into the tool holder. When changing the tool insert, it

can be thrown out toward the front.

– Turn the bit magazine 11 until the desired screwdriver bit 1 can be

seen in viewing window 3.

– Push the sliding switch 7 toward the front.

Bosch Power Tools

English | 31

2 609 005 858 | (15.12.11)