Bosch PSR Select WEU Manual de instruções original - Página 15

Procurar online ou descarregar pdf Manual de instruções original para Ferramenta eléctrica Bosch PSR Select WEU. Bosch PSR Select WEU 21 páginas.

OBJ_BUCH-1564-001.book Page 31 Thursday, December 15, 2011 8:36 AM

Inserting Screwdriver Bits into the Bit Magazine

(see figure B–C)

When changing the application tool, wear safety goggles. Do not

stare directly into the tool holder. When changing the tool insert, it

can be thrown out toward the front.

Only insert one screwdriver bit per chamber into the bit magazine.

Use only short standard screwdriver bits. Longer screwdriver bits

cannot be loaded into the bit magazine.

– Turn the bit magazine 11 until an empty chamber can be seen in view-

ing window 3.

– Push the sliding switch 7 toward the front.

– Insert the screwdriver bit 1 directly into the tool holder 2.

– Push the sliding switch 7 to the rear to load the screwdriver bit 1 into

bit magazine 11.

– As soon as you push the sliding switch 7 to the rear or actuate the

On/Off switch 10 when in the rear position, the bit magazine 11 is illu-

minated for approx. 20 seconds.

Changing the Tool (see figure D)

When changing the application tool, wear safety goggles. Do not

stare directly into the tool holder. When changing the tool insert, it

can be thrown out toward the front.

– Turn the bit magazine 11 until the desired screwdriver bit 1 can be

seen in viewing window 3.

– Push the sliding switch 7 toward the front.

Bosch Power Tools

English | 31

2 609 005 858 | (15.12.11)