Andersen 400 Series 설치 및 제거 매뉴얼
{카테고리_이름} Andersen 400 Series에 대한 설치 및 제거 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 400 Series 2 페이지. Lock mechanism
Andersen 400 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지), 조정 (4 페이지), 변경 매뉴얼 (2 페이지)
페이지 인쇄
Half Insect Screen
Installation and Removal Guide
Product Series: 400 Series
Product Type: Tilt-Wash Double-Hung Windows
Read these instructions before starting procedure. For additional information visit www.andersenwindows.com. For questions call 1-888-888-7020.
Parts Included:
(1) Half Insect Screen
WARNING
Screen will not stop child
from falling out window.
Keep child away from open
window.
1
"Andersen" and all other marks where denoted are trademarks of Andersen Corporation. ©2018 Andersen Corporation. All rights reserved.
(1) Bug Seal
OR
WARNING
Use caution when working at elevated heights
and around window and door openings.
Follow the manufacturers' instructions for
ladders and scaffolding. Failure to do so
could result in injury or death.
(Pile faces
interior)
Position bug seal to top side
of insect screen, as shown.
Flip pull tab down.
Tools and Supplies Needed:
White
Non-White
with
(2) #6 x 3/8" Screws
Half insect screen can move up and
down in the frame channel when
latches are engaged. Slide insect
screen down to sill.
2
Non-white Insect Screens Only
Safety
Phillips
Glasses
Screwdriver
NOTICE
For non-white colors, fasten
through the pre-drilled holes
with screws provided.
000 547 5 B B- 0 0 05/22/18