Andersen 400 Series 변경 매뉴얼

{카테고리_이름} Andersen 400 Series에 대한 변경 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 400 Series 2 페이지. Lock mechanism
Andersen 400 Series에 대해서도 마찬가지입니다: 설치 및 제거 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 조정 (4 페이지)

페이지 인쇄

Lock Mechanism Handing Change Guide

for Andersen

A-Series Hinged Inswing & Outswing; 400 Series

Frenchwood

Hinged Inswing & Outswing Patio Doors and

400 Series Frenchwood

with Stormwatch

Read all instructions carefully before attempting this procedure. If you have any questions about your ability

to complete this procedure, call Andersen at 1-888-888-7020 for further direction. Andersen WindowCare

service center hours are Monday through Friday, 7 a.m. to 7 p.m. Central Time and Saturday, 8 a.m. to 4 p.m.

Central Time. Thank you for choosing Andersen

Every assembly and installation is different (windloads, structural support, etc.), and Andersen strongly

recommends consultation with an Andersen supplier or an experienced contractor, architect, or structural engineer

prior to the assembly and installation of any Andersen product. Andersen has no responsibility in regard to the

post-manufactured assembly and installation of Andersen products.

Use caution when working at elevated

heights and around unit openings. Follow

manufacturer's instructions for safe use of

ladder and/or scaffolding. Failure to do so

may result in injury or death.

Tools & Supplies

• Safety Glasses

• 1/8" or Smaller Flat Blade Screwdriver

▶

Lock handing can be changed without removing

entire lock mechanism from panel.

Hinged Inswing & Outswing Patio Doors

Protection

products.

Follow manufacturer's

instructions for safe operation

of hand/power tools. Always

wear safety glasses. Failure to

do so may result in injury and/

or product damage.

Component Identification

Lock Mechanism Handing Change Guide

Windows and doors can be heavy.

Use safe lifting techniques and a

reasonable number of people with

enough strength to lift, carry and

install window and door products

to avoid injury and/or product

damage.

Lock Mechanism

Instruction Guide 0005204 BC

Revised 03/19/09