Andersen A1 설치 매뉴얼 - 페이지 5
{카테고리_이름} Andersen A1에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen A1 14 페이지.
페이지 인쇄A N D E R S E N
A 1 I N S T A L L A T I O N G U I D E
H O W T O I N S T A L L
1. SELECT THE INSTALLATION LOCATION
1.1
GENERAL CRITERIA FOR SELECTING
AN INSTALLATION SITE
The Andersen A1 has been
designed for indoor and outdoor
domestic use. If possible, install the
Andersen A1 so that it is protected
from direct rainfall and sunlight
to avoid the effects of weather,
such as icing, overheating, and
damage by hailstones or the like.
Ensure that you comply with the
permitted operating ambient
conditions. Ensure compliance
with local installation standards
and regulations. Ensure that the
proposed mounting surface is secure
and substantially vertical and flat,
take account of the weight of the
Andersen A1 at 15 Kg
1.2
RECOMMENDED CLEARANCES
AROUND THE INSTALLED
ANDERSEN A1
See fig F3.1 for recommended
clearances around the installed
Andersen A1. Ease of winding
the charge cable into the A1
magic slots may be reduced if
the recommended clearances are
reduced. If two Andersen A1 units
are placed next to each other then
they can share the horizontal gap
between them. The working space
around the Andersen A1 can be the
mounting surface or open space.
The Andersen A1 can be placed
close to pipes, trunking and the like
providing they do not prevent easy
access and winding of the charge
cable in to the magic slots.
Fig F3.1
345mm (13")
200mm
(8")
A
A N D E R S E N
200mm
200mm
(8")
PAGE 5
(8")