Community CLOUD 4 설치 매뉴얼 - 페이지 10

{카테고리_이름} Community CLOUD 4에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Community CLOUD 4 17 페이지. Community cloud series high output ceiling speakers

페이지 인쇄
Community CLOUD 4 설치 매뉴얼
INSTALLATION AND WIRING
Daisy-chain Wiring (Using Loop-Through Terminals - Pins 1 & 4):
To daisy-chain the wiring, connect the wire pair of the follow-on speaker to pins 1 and 4.
+
From
amplifier
or
_
previous
speaker
Figure 10 –
Daisy-chain wiring
Step 5
Plug connector into connector socket
With all wiring to the connector completed, plug the connector into the socket in the speaker's
terminal cup. Remember to tighten any loose screws to eliminate any vibration. Slip the input
terminal cover back onto the rear of the speaker and tighten the two screws that keep it in place.
8
1
2
3 4
_
To next
speaker
+
CLOUD 4 and CLOUD 6 – Installation Guide
DAISY CHAIN WIRING
By connecting the wire pair
of the subsequent speaker to
pins 1 & 4, then all
subsequent speakers will be
disconnected when this
speaker's connector is
disconnected during
troubleshooting. This can
be a useful way to isolate
problems to a section of the
distributed line while
leaving the wires attached
to the connector.
Figure 11 – Plug connector
into
connector socket