ATIGO A3101 설치 매뉴얼 - 페이지 2

{카테고리_이름} ATIGO A3101에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIGO A3101 7 페이지. 2-wire video system
ATIGO A3101에 대해서도 마찬가지입니다: 설치 매뉴얼 (11 페이지), 설치 매뉴얼 (15 페이지)

페이지 인쇄
Introduction
The Atigo door entry system is a 2-Wire
system that can be expanded up to 4
entrance panels and up to 32 internal
monitors per system.
For programming camera module use built in
set of DIP switches and touch keys.
The camera module has built in visual and
audible status indictors as well as white LED
for night view.
Installation Notes:
Wire up the system in accordance with the
Wiring diagram supplied.
Make sure A2300 is installed next to the
Power supply when installing multiple
Entrances.
Set each Door Station ID as per instructions
on Page 3
Set the address for each handset by following
programming instructions supplied with the
unit.
2 |
P a g e
System Layout:
Maximum of 4 monitors can be connected to
a single call button.
Maximum of 4 monitors can be connected in
daisy chain configuration
Maximum of 4 monitors can be connected to
a single A2200 in distributor mode (DIP
switch 1 OFF)
Maximum of 4 A2200 units can be connected
to single A2200 in raiser mode (DIP switch 1
ON)
Maximum of 32 monitors can be connected in
any given system.