Bosch Nexxt Series 작동, 관리 및 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Bosch Nexxt Series에 대한 작동, 관리 및 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Nexxt Series 27 페이지.
Bosch Nexxt Series에 대해서도 마찬가지입니다: 작동, 관리 및 설치 지침 매뉴얼 (26 페이지)

페이지 인쇄

Water connection

Water supply

CAUTION

The washing machine must only

be operated with cold and hot

(max. 140 °F // 60 °C) tap water.

Do not connect the appliance to

the mixer tap of an unpressuri

zed hot water boiler.

If in doubt, have the water

connection installed by an

authorized technician.

The water supply hoses must not

be:

Bent or flattened.

Modified or cut (stability can

no longer be guaranteed).

Plastic threads must only be

tightened by hand. Do not remove

the strainers from the water supply

hoses.

Connection

C Cold water connection and

H Hot water connection (max. 140 F // 60 C)

After the connection,

Turn on the water completely,

and check that connection

points are watertight.

Observe the water pressure in the

supply network:

The water pressure should be

between 14.5 and 145 p.s.i.

(1 and 10 bars) when the tap

is turned on, at least 2.2 U. S.

gallons (8 liters) of water should

be discharged per minute.

A pressure regulator valve must

be installed if the maximum

water pressure is exceeded.

min.0,4''

(10 mm)

CAUTION

The connection points are under

full water pressure. Check seal

with tap fully open.

CAUTION

To prevent water damage, the

hot and cold water valves should

be accessible when the washing

machine is in place and should

always be turned off when the

washing machine is not in use.

CAUTION

If installing the washing machine

in a new building or a building in

which the plumbing system was

recently installed or upgraded,

flush the lines before installing

the washing machine to remove

any sand, dirt or residue.