Bosch Nexxt Series 작동, 관리 및 설치 지침 매뉴얼 - 페이지 8
{카테고리_이름} Bosch Nexxt Series에 대한 작동, 관리 및 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch Nexxt Series 27 페이지.
Bosch Nexxt Series에 대해서도 마찬가지입니다: 작동, 관리 및 설치 지침 매뉴얼 (26 페이지)
페이지 인쇄
Removing the
transport bolts
d
CAUTION
All 4 transport bolts must be re
moved before using the ap
pliance for the first time and must
be retained for any future trans
port (e.g. when
moving).
q
Release screws using a cranked
1/2" wrench provided until they
can be moved freely.
q
Remove all 4 transport bolts
(bolt, spring, washer and bush
ings) by reaching through the
open washing machine door and
pulling the drum slightly forward.
q
Insert the covers.
Storing the transport bolts
Always keep the transport bolts for
future transportation of the ap
pliance (such as when moving out).
q
Store the transport bolts with
the washer and bushing
attached.
8
Leveling procedure
Each foot of the appliance must be
placed firmly on the ground or the
d
pedestal to prevent the washing
machine from wobbling..
Level the washing machine front to
back and side to side with the four
height adjustable feet and a bubble
level:
d
WARNING
RISK OF INJURIES-Take care
when using the wrench.
q
Loosen the counter nut 1 using
the wrench for levelling.
q
Adjust the height by turning the
height adjustable foot 2.
q
Tighten lock nut 1 against the
housing.
Electrical connection
GROUNDING INSTRUCTIONS
This appliance must be grounded.
In the event of a malfunction or
breakdown, grounding will reduce
the risk of electrical shock by pro
viding a path of least resistance for
the electric current. This appliance
features a cord with an equipment
grounding conductor and a ground
d
ing plug. The plug must be plugged
into an appropriate outlet which has
been properly installed and
grounded in accordance with all
local regulations and ordinances.
d
DANGER
Improper connection of the
equipment grounding conductor
may result in electric shock.
Have the appliance checked by
a qualified electrician or service
technician if you are in doubt as
to whether the washer has been
properly grounded.
Do not modify the plug provided
with the appliance - if it will not fit in
the outlet, have a proper outlet
installed by a qualified electrician.
d
WARNING
The washing machine must only
be connected to an individual
branch circuit via a socket which
has been properly installed and
grounded.
The household electrical voltage
must correspond to the voltage
specification on the washing
machine (rating plate, see page 26).
Connection specifications as well
as the required fuses are stipulated
on the appliance rating plate.
Volts
Hertz
110-120
60
d
d
Amperes
Watts
15
1350
(max.)