Anderson Hybrid-X 제품군 개요 - 페이지 3

{카테고리_이름} Anderson Hybrid-X에 대한 제품군 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Anderson Hybrid-X 5 페이지.

Hybrid-X start up

14. Adjust the guide rollers (near the traction wheels) according to the bale size (round or

square);

15. Test the pusher and hoop stroke manually by using the automatic system trigger handle.

15 Test the pusher and hoop stroke manually by using the automatic system trigger handle

Then, proceed to the adjustments (hoop start, return of the pusher) that will insure the

good overlap of the plastic film between the bales. Refer to the sticker on the machine for

more details;

16 Test the X-Tractor system by using the lever (on the main valve);

16. Test the X Tractor system by using the lever (on the main valve);

17. Verify that the hand held remote control is working well:

 Close the emergency stop and reopen it;

 Turn on the blue button on the control panel;

 Push on the

 Use the arrows to turn the steering wheels both sides;

 Push on the

 To change the auto-pilot sensor side, push on the

 To close the engine, push on the

 To close the engine push on the

 Push on the blue button to open the working lights;

button of the remote control to start the engine (full throttle);

button to engage the auto-pilot;

button;