Anderson Hybrid-X 제품군 개요 - 페이지 4

{카테고리_이름} Anderson Hybrid-X에 대한 제품군 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Anderson Hybrid-X 5 페이지.

Hybrid-X start up

18. Install the plastic rolls:

 Pull off towards the back of the machine the manual hoop trigger (handle under the

control panel);

 Start the Honda engine;

 Turn slightly the hoop speed valve handle to turn the hoop so the stretcher goes at

the best position for the plastic film installation;

 Open the safety gate (the engine will cut off automatically);

 If needed, turn the ball valve (brake valve) beside the safety gate handle to brake

the hoop while the plastic film installation;

 Install the plastic film roll within the 2 aluminum holders. It is really important to

install the adjustable holder perfectly. If it is not well locked, it could damage

some components;

 Follow the instructions on the sticker to install the plastic film through the stretcher

rolls;

 Pull out the plastic film forming a knot and hold it in the fingers (at the end of a bale

guide) and repeat for each stretcher;