ATIK Cameras 11000 사용자 설명서 - 페이지 6
{카테고리_이름} ATIK Cameras 11000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIK Cameras 11000 10 페이지. Large format camera
ATIK Cameras 11000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
3.2 Sensor
The sensors used in the Atik 4000/11000 cameras are listed below:
Monochrome
Color
Atik 4000
Kodak KAI-4022
Kodak KAI-4022C
Atik 11000
Kodak KAI-11002
Kodak KAI-11002C
The optical window used in front of the CCD is a BK7 with BBAR coatings on both sides
ensuring that no reflection will appear in your image.
3.3 Analog to Digital Converter (ADC)
The Analog to Digital Converter (ADC) is a 16-bit ADC. This means that your Atik camera will
allow you to record subtle levels of gray, providing you with enhanced dynamic range when
capturing an image.
3.4 Power Consumption
Your Atik camera was designed to have low power consumption: please see the table in
section 4 for details specific to your camera model. The 2.1mm centre-positive DC input is
compatible with a wide range of 12V DC supplies.
WARNING: The mains power adaptor supplied with the camera is for indoor or
observatory use only. There is a risk of electric shock if the adaptor is used in damp
environments or outside. If in doubt do not use the adaptor and consult a trained
electrician.
3.5 USB Port
The Atik 4000/11000 cameras use a USB 2.0 high-speed interface to minimize image
download times. A higher speed "preview" mode is also available, providing roughly
twice the speed of the normal mode.
Page 6