ATIK Cameras 11000 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Кольорова камера ATIK Cameras 11000. ATIK Cameras 11000 10 сторінок. Large format camera
Також для ATIK Cameras 11000: Посібник із швидкого старту (20 сторінок), Посібник із швидкого старту (2 сторінок)
Друкувати сторінку
3.2 Sensor
The sensors used in the Atik 4000/11000 cameras are listed below:
Monochrome
Color
Atik 4000
Kodak KAI-4022
Kodak KAI-4022C
Atik 11000
Kodak KAI-11002
Kodak KAI-11002C
The optical window used in front of the CCD is a BK7 with BBAR coatings on both sides
ensuring that no reflection will appear in your image.
3.3 Analog to Digital Converter (ADC)
The Analog to Digital Converter (ADC) is a 16-bit ADC. This means that your Atik camera will
allow you to record subtle levels of gray, providing you with enhanced dynamic range when
capturing an image.
3.4 Power Consumption
Your Atik camera was designed to have low power consumption: please see the table in
section 4 for details specific to your camera model. The 2.1mm centre-positive DC input is
compatible with a wide range of 12V DC supplies.
WARNING: The mains power adaptor supplied with the camera is for indoor or
observatory use only. There is a risk of electric shock if the adaptor is used in damp
environments or outside. If in doubt do not use the adaptor and consult a trained
electrician.
3.5 USB Port
The Atik 4000/11000 cameras use a USB 2.0 high-speed interface to minimize image
download times. A higher speed "preview" mode is also available, providing roughly
twice the speed of the normal mode.
Page 6