Bosch WTA34 Series 수리 지침 - 페이지 2
{카테고리_이름} Bosch WTA34 Series에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch WTA34 Series 15 페이지. Vented tumble dryer
페이지 인쇄TUMBLE DRYER
Signal
Start time*
*
3.
Programme progress indicator
Dampness in the washing is continuously checked by the electronic sensor system.
The programme status is displayed by an LED.
III.
DESCRIPTION OF FUNCTION / TECHNICAL INFORMATION
1.
General information
The design is based on a fully electronic solution. All control functions are combined on the
power module. The selected drying setting is determined by a conductivity measurement.
The conductivity measurement of the washing is converted to a voltage measurement.
Sliding contact
driver electrode
r120085e -15/2
04.99
Button pressed (LED on) – signal emitted in the "anti-creasing"
phase.
Changing the volume – hold down the button, the signal changes.
When the button is released, the volume has been changed
and stored.
Switching off the signal – press the button again (LED off).
The start time can be specified from 1–19 hours. The running
time is indicated by a flashing dot in the 7-segment display.
The "anti-creasing" phase is extended to 8 hours.
If the Start button is pressed, the appliance starts immediately.
If the door is opened during the preselected time,
the Start time LED flashes, press the Start time button again –
the LED switches to a steady light.
Optional (WTA3480; WTA3500)
Sliding contact
earth
Washing
resistance
Sliding contact
driver electrode
Insulation
Slipring
Drum wall
+5 V
Input
Micro-
controller