Bosch WTA34 Series Instruções de reparação - Página 2

Procurar online ou descarregar pdf Instruções de reparação para Secador Bosch WTA34 Series. Bosch WTA34 Series 15 páginas. Vented tumble dryer

TUMBLE DRYER

Signal

Start time*

Programme progress indicator

Dampness in the washing is continuously checked by the electronic sensor system.

The programme status is displayed by an LED.

III.

DESCRIPTION OF FUNCTION / TECHNICAL INFORMATION

General information

The design is based on a fully electronic solution. All control functions are combined on the

power module. The selected drying setting is determined by a conductivity measurement.

The conductivity measurement of the washing is converted to a voltage measurement.

Sliding contact

driver electrode

r120085e -15/2

04.99

Button pressed (LED on) – signal emitted in the "anti-creasing"

phase.

Changing the volume – hold down the button, the signal changes.

When the button is released, the volume has been changed

and stored.

Switching off the signal – press the button again (LED off).

The start time can be specified from 1–19 hours. The running

time is indicated by a flashing dot in the 7-segment display.

The "anti-creasing" phase is extended to 8 hours.

If the Start button is pressed, the appliance starts immediately.

If the door is opened during the preselected time,

the Start time LED flashes, press the Start time button again –

the LED switches to a steady light.

Optional (WTA3480; WTA3500)

Sliding contact

earth

Washing

resistance

Sliding contact

driver electrode

Insulation

Slipring

Drum wall

+5 V

Input

Micro-

controller