ANDERSON-NEGELE AV-9900 기본 구성 매뉴얼 - 페이지 3
{카테고리_이름} ANDERSON-NEGELE AV-9900에 대한 기본 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ANDERSON-NEGELE AV-9900 5 페이지. Htst recorder controller
페이지 인쇄3
16. Scroll to Limit Low – Low end of input range (HWC, CPR, SFLR)
a.
Press MOD to get cursor
b.
Use up/down arrows to change value if needed
c.
Press ENTER to save
17. Scroll to Limit High – High end of input range (HWC, CPR, SFLR)
a.
Press MOD
b.
Use up/down arrows to change value if needed
c.
Press ENTER to save
18. Repeat for all Inputs
19. Press REST back to main screen
1.
Scroll to Configuration
2.
Press down
3.
Scroll to Recording Pens
4.
Press down to STLR INPUT/EVENT
5.
Press ENTER
6.
Scroll to INP Limit Zone Low (inside ring of chart)
a.
Press MOD
b.
Use up/down arrows to change value if needed
c.
Press ENTER to save
7.
Scroll to INP Limit Zone High (outside ring of chart)
a.
Press MOD
b.
Use up/down arrows to change value if needed
c.
Press ENTER to save
8.
***For SFLR only Scroll to INP Zone High Division***
a.
Must be set to 40
9.
Repeat steps for all available inputs
10. Press RESET back to main screen
Programming 4-20mA Outputs
1.
Scroll to Function Setup
2.
Press Down
3.
Select the input you are trying to assign (make sure it is flashing and press enter or press
the soft key under the input)
4.
Scroll to INP Transmit to Current Output
5.
Press MOD to get cursor
a.
a. Use up/down arrows to change
i.
i. 1 = output #1
ii.
ii. 2 = output #2
b.
b. Press ENTER to save
Programming Inputs
Programming Recording Pens
(Printed Chart Scales)
AV-9900 HTST Recorder Controller
(cont'd)