Carolina Cooker M56913 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Carolina Cooker M56913에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Carolina Cooker M56913 17 페이지. Cast iron stove (single burner)
Carolina Cooker M56913에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄

3. Install air flow control bolt and spring in each burner.

4. Install burner assemblies with two fiat head screws,

washers, lockwashers, and nuts.

Carolina Cooker®

844-478-4334

5. Install gas valve manifold to the burners using

four flat head screws.

6. Attach a hose assembly (customer supplied).

To Prevent damage to the shut-off

NOTICE

valve when tightening the

connection, hold brass hex nut with one wrench while

tightening regulator hose assembly fitting with the other

wrench. Do not tighten the connection using a single

wrench.

WARNING

to, a natural gas supply line.

7. Make sure both shut-off valves are closed and

connect an LP cylinder, as described in section "5.2

Connecting the LP Cylinder" on page 10.

8. Perform the Soapy Water Test, as described in

section "5.3 Soapy Water Test" on page 11.

This appliance was not designed

for, and should not be connected

Model M56913

October 2020