Carolina Cooker M56913 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kuchenka Carolina Cooker M56913. Carolina Cooker M56913 17 stron. Cast iron stove (single burner)
Również dla Carolina Cooker M56913: Instrukcja obsługi (16 strony)
Drukuj stronę3. Install air flow control bolt and spring in each burner.
4. Install burner assemblies with two fiat head screws,
washers, lockwashers, and nuts.
Carolina Cooker®
844-478-4334
5. Install gas valve manifold to the burners using
four flat head screws.
6. Attach a hose assembly (customer supplied).
To Prevent damage to the shut-off
NOTICE
valve when tightening the
connection, hold brass hex nut with one wrench while
tightening regulator hose assembly fitting with the other
wrench. Do not tighten the connection using a single
wrench.
WARNING
!
to, a natural gas supply line.
7. Make sure both shut-off valves are closed and
connect an LP cylinder, as described in section "5.2
Connecting the LP Cylinder" on page 10.
8. Perform the Soapy Water Test, as described in
section "5.3 Soapy Water Test" on page 11.
9
This appliance was not designed
for, and should not be connected
Model M56913
October 2020