ComNav 15CI 소유자 매뉴얼 - 페이지 5
{카테고리_이름} ComNav 15CI에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ComNav 15CI 11 페이지. Reversing motor pumpset
페이지 인쇄HYDRAULIC CONNECTIONS FOR TWO LINE STEERING SYSTEMS
A simple schematic of the pump installation is shown in Figure 2.
Delivery Lines:
Ports A and B in the diagram above are
the input/output ports of the pump and
must be connected to the steering lines
coming from the steering cylinder. It does
not matter which pump port is connected
to which steering line.
The compensating line MUST have a gradual rise from the pump to the connection to the
steering system. This allows air to rise out of the pump, ensuring a constant supply of oil to the
pump.
29010015V1.0(15CI & 25CI Pumps).doc
2 Line Steering System Installation
Compensating Line:
4
In the above diagram Port C is the
compensating or bleed line, and must be
connected to the steering system's
reservoir. This connection can be made
at a helm pump, remote reservoir (if there
is one), the compensating line connecting
two helm pumps, or the compensating
line connecting a helm pump to the
remote reservoir. If the connection is
being made directly to the helm pump,
ensure that the bleed line is connected to
the LOWER helm bleed port.