Caroma Invisi Series II 설치 매뉴얼 - 페이지 9
{카테고리_이름} Caroma Invisi Series II에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caroma Invisi Series II 20 페이지. Urinal concealed cistern
Caroma Invisi Series II에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)
페이지 인쇄
Inwall Access - stud wall
1.
Calculate the finished floor height
(allowing for floor gradings and tile
thickness, etc.) and add this to the
known height of the selected urinal's
inlet. Mark this resulting height on
This is your datum
the stud -
and flush pipe centre line.
2.
Screw cistern to studs via the 2
front, top and bottom holes in each
mounting bracket making sure the
water connection fitting is on the left
hand side of cistern.
5mm Min.
45mm Max.
Cladding Thickness
Service Access Panel
Centre Line (standard mounting)
Datum
3.
Fabricate flush pipe using the
Copper Adaptor provided.
4.
Lubricate 'O'Ring on cistern tail using
soapy water and slide flush pipe on.
5.
Connect the water supply.
Water Supply Connection
90mm Min.
Cavity Depth
335mm
to
access panel
centre line
Refer to
specifications
of the selected
urinal.
Installing the Cistern -
6.
Remove Dust Cover, turn Isolating
Tap ON, fill tank & set water level using
Adjusting Screw on the inlet valve.
ON
7.
Check cistern and all joints for leaks.
8.
Turn Isolating Tap OFF. Continue
with Preparation for Fitout on page 15.
400mm – 420mm
45mm
- Water Supply Connection
237 002
OFF
Dust Cover