ATISAYA AUTO KISAN 설치 지침 매뉴얼 - 페이지 9

{카테고리_이름} ATISAYA AUTO KISAN에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATISAYA AUTO KISAN 12 페이지.

AUTO KISAN INSALLATION INSTRUCTIONS

HOW TO USE AUTO KISAN:

1. Buy a SIM having good signals in your area. Insert the SIM in auto kisan device.

2. Register a number for which you want to receive motor updates from auto kisan.

Ex: RNXXXXXXXXXX (Your Phone Number)

Note: You need to have message office for SIM placed in auto kisan device to receive motor updates.

3. Can add maximum other two mobile numbers to operate the motor. To register those numbers send

a message to auto Kisan SIM from registered mobile number in the format ADXXXXXXXXXX (Phone

Number).

4. To delete the added mobile numbers, send a message "RESET" to auto Kisan SIM from registered

mobile number. After this you can repeat step 3 if you need additional numbers to be added.

5. To delete registered mobile number (OWNER), send a message "RESETXXXXXXX (password given in

warranty card) to auto kisan SIM. After this you have to repeat step 2, 3. This step is used only if

owner SIM is lost or if you want to change the owner number.

6. Send a message "LOAD" from registered mobile number when the motor is running with full water

to enable dry bore protection. Dry bore protection will not be enabled until you send this message.

Motor ON/OFF by a Call:

1. To ON the motor, call to auto kisan SIM from any mobile. After call lift press 1 to switch ON the

motor. And then call will disconnect automatically and a confirmation message Motor ON will come

to your registered mobile.

2. To OFF the motor, call to auto kisan SIM from any mobile. After call lift press 2 to switch OFF the

motor. And then call will disconnect automatically and a confirmation message Motor OFF will

come to your registered mobile.

Motor ON/OFF by Messages:

There is a Timer Technology in auto kisan so that you can set a time frame to run the motor. You will

receive the confirmation messages.

1. To turn ON the motor, you must send a message MON to SIM in Auto Kisan. Then motor will be

switched ON and you will get confirmation message as MOTOR ON.

2. To turn OFF the motor, you must send a message MOFF to SIM in Auto Kisan. Then motor will be

switched OFF and you will get confirmation message as MOTOR OFF.

ATISAYA ENGINEERING SERVICES

H.No. 12-1-28/B/N, Vijaya Gardens, Nagole, Bandlaguda Main Road, Hyderabad,

500068, India