Comnet CWFE2SCM2 설치 및 운영 매뉴얼 - 페이지 6
{카테고리_이름} Comnet CWFE2SCM2에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet CWFE2SCM2 12 페이지. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Comnet CWFE2SCM2에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 설치 및 운영 매뉴얼 (10 페이지)
페이지 인쇄
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of the media
converter. They provide real-time information of system and optional status.
The indicator includes Power, UTP 100, LK/ACT, FDX/COL, Fiber LK/ACT,
FDX/COL. The following table provides description of the LED status and
their meanings.
LED
PWR
100
LK/ACT
(UTP)
LK/ACT
(Fiber)
FDX/COL
(UTP)
FDX/COL
(Fiber)
Status
Meaning
Green
Power on
Green
100Mbps UTP Speed
OFF
10Mbps UTP Speed
Green
The unit is linking with its link partner.
The unit is transmitting or receiving packets from UTP
Blinks
devices.
Off
No device attached
Green
The unit is linking with the corresponding unit.
The unit is transmitting or receiving packets from FX
Blinks
devices.
Off
No device attached
Orange
The UTP port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
Orange
The fiber port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
4