Comnet CWFE2SCM2 Instrukcja instalacji i obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Konwerter mediów Comnet CWFE2SCM2. Comnet CWFE2SCM2 12 stron. Commercial grade 10/100 mbps ethernet 2 port electrical-to-optical media converter
Również dla Comnet CWFE2SCM2: Skrócona instrukcja obsługi (4 strony), Instrukcja instalacji i obsługi (10 strony)
Drukuj stronę
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of the media
converter. They provide real-time information of system and optional status.
The indicator includes Power, UTP 100, LK/ACT, FDX/COL, Fiber LK/ACT,
FDX/COL. The following table provides description of the LED status and
their meanings.
LED
PWR
100
LK/ACT
(UTP)
LK/ACT
(Fiber)
FDX/COL
(UTP)
FDX/COL
(Fiber)
Status
Meaning
Green
Power on
Green
100Mbps UTP Speed
OFF
10Mbps UTP Speed
Green
The unit is linking with its link partner.
The unit is transmitting or receiving packets from UTP
Blinks
devices.
Off
No device attached
Green
The unit is linking with the corresponding unit.
The unit is transmitting or receiving packets from FX
Blinks
devices.
Off
No device attached
Orange
The UTP port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
Orange
The fiber port is operating in full-duplex mode.
Blinks
Collision of Packets is occurring in the port.
Off
Half-duplex mode or no device attached
4