Comnet EXP100R 설치 및 운영 매뉴얼

{카테고리_이름} Comnet EXP100R에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet EXP100R 10 페이지. Expansion module for use with fdw1000 wiegand module
Comnet EXP100R에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지)

페이지 인쇄

INSTALLATION AND OPERATION MANUAL

EXP100

EXPANSION MODULE FOR USE

WITH FDW1000 WIEGAND MODULE

When used with the FDW1000 series of fiber optic Wiegand extender modules,

the ComNet

EXP100 Expansion Module enables additional Wiegand control

™

panels, readers, and associated door/gate hardware to be added to the network.

The 2-wire RS-485 data interface between the expansion modules provides a secure

and completely supervised connection, with excellent immunity to electrical noise

and interference. Up to 8 EXP100s can be used in a drop-and-repeat/daisy-chain

topology, and each EXP100 may be set to a unique address (1 thru 15) via DIP-switch

selection.

An auxiliary I/O (input/output) interface is available for ascertaining door, gate, and

control panel status and signaling, and a relay interface provides the door strike or

gate activation functions. See Figures 10 and 11 beginning on Page 5 for a guide

to the I/Os and Relay Controls.

The EXP100 is supplied as a remote unit for door or gate locations or a central unit

for control panel installation. See Figures 3 through 5 on Page 3 for Central and

Remote Dip Switch Settings.

These extenders are designed for long-term, reliable operation in harsh industrial

environments, and a fault-specific LED indicator is provided for rapidly ascertaining

the operating status of the extender and the link. See Figure 17 on Page 12 for an

explanation of LED indicators.

Packaged in a rugged aluminum housing, the EXP100 is designed for shelf or

surface mounting. See Figure A on Page 12 for mounting instructions.

See Figures 1 – 17 for complete installation details.

Rev. 04.18.13

INS_EXP100_REV– 12/04/12 PAGE 1