Comnet EXP100R 설치 및 운영 매뉴얼 - 페이지 10

{카테고리_이름} Comnet EXP100R에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet EXP100R 10 페이지. Expansion module for use with fdw1000 wiegand module
Comnet EXP100R에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지)

페이지 인쇄

MECHANICAL INSTALLATION INSTRUCTIONS

INSTALLATION CONSIDERATIONS

This fiber-optic link is supplied as a Standalone module. Units should be

installed in dry locations protected from extremes of temperature and

humidity.

CAUTION: Take care not to press on the LED.

WARNING: Unit is to be used with a Listed Class 2 or LPS power supply.

IMPORTANT SAFEGUARDS:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment may

be greater than room ambient. Therefore, consideration should be given to

installing the equipment in an environment compatible with the maximum

ambient temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such

that the amount of air flow required for safe operation of the equipment is not

compromised.

FIGURE A

Dimensions are for a standard ComNet EXP100 module.

Ø0.15"

[0.38 cm]

3 CORPORATE DRIVE | DANBURY, CT 06810 | USA

T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]

8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE

T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]

3.65"

[9.27 cm]

Unit Height

0.75" [1.91 cm]

3.3"

[8.38 cm]

INS_EXP100_REV– 12/04/12 PAGE 10

1.4"

[3.56 cm]

2.8" [7.11 cm]

Rev. 04.18.13