Comnet EXP100R Instrukcja instalacji i obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Przedłużacz Comnet EXP100R. Comnet EXP100R 10 stron. Expansion module for use with fdw1000 wiegand module
Również dla Comnet EXP100R: Instrukcja instalacji i obsługi (12 strony)
Drukuj stronęMECHANICAL INSTALLATION INSTRUCTIONS
INSTALLATION CONSIDERATIONS
This fiber-optic link is supplied as a Standalone module. Units should be
installed in dry locations protected from extremes of temperature and
humidity.
CAUTION: Take care not to press on the LED.
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may
be greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is not
compromised.
© 2013 Communications Networks Corporation. All Rights Reserved. "ComNet" and the "ComNet Logo" are registered trademarks of Communication Networks, LLC.
FIGURE A
Dimensions are for a standard ComNet EXP100 module.
Ø0.15"
[0.38 cm]
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [email protected]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | [email protected]
3.65"
[9.27 cm]
Unit Height
0.75" [1.91 cm]
3.3"
[8.38 cm]
INS_EXP100_REV– 12/04/12 PAGE 10
1.4"
[3.56 cm]
2.8" [7.11 cm]
Rev. 04.18.13