Comnet FVT1021 series 설치 지침 - 페이지 2

{카테고리_이름} Comnet FVT1021 series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet FVT1021 series 4 페이지. 10-bit video receiver with return data

INSTALLATION INSTRUCTIONS

WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.

WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other means of security.

Access should be limited to service personnel who have been instructed about the reasons for the restrictions to the location. Any and all pre-

cautions should be taken and controlled by the authority responsible for the location.

IMPORTANT SAFEGUARDS:

A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environ-

ment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible

with the maximum ambient temperature (Tma) specified by the manufacturer.

B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the

equipment is not compromised.

For Technical Support, Contact Your Nearest Communication Networks Office:

3 Corporate Drive • Danbury, CT 06810 • USA • Tel: 203-796-5300 • Toll Free: 1-888-678-9427 • www.comnet.net

8 Turnberry Park Road • Gildersome • Morley • Leeds, UK LS27 7LE • Tel: +44 (0)113 307 6400 • Fax: +44 (0)113 253 7462

10-BIT VIDEO RECEIVER WITH RETURN DATA

BLACK WITH WHITE STRIPE

NOTE: Remove Electrical Connector for Rack Mount Units

FVT/FVR1021

MULTIMODE

OR SINGLE MODE

OPTICAL FIBER

BLACK

INS_FVT/FVR1021_REV–

07/28/09

Page 2