Comnet FVT1021 series Installatie-instructies - Pagina 2
Blader online of download pdf Installatie-instructies voor {categorie_naam} Comnet FVT1021 series. Comnet FVT1021 series 4 pagina's. 10-bit video receiver with return data
Pagina afdrukkenINSTALLATION INSTRUCTIONS
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use of a lock and key or other means of security.
Access should be limited to service personnel who have been instructed about the reasons for the restrictions to the location. Any and all pre-
cautions should be taken and controlled by the authority responsible for the location.
IMPORTANT SAFEGUARDS:
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environ-
ment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible
with the maximum ambient temperature (Tma) specified by the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the
equipment is not compromised.
For Technical Support, Contact Your Nearest Communication Networks Office:
3 Corporate Drive • Danbury, CT 06810 • USA • Tel: 203-796-5300 • Toll Free: 1-888-678-9427 • www.comnet.net
8 Turnberry Park Road • Gildersome • Morley • Leeds, UK LS27 7LE • Tel: +44 (0)113 307 6400 • Fax: +44 (0)113 253 7462
10-BIT VIDEO RECEIVER WITH RETURN DATA
BLACK WITH WHITE STRIPE
NOTE: Remove Electrical Connector for Rack Mount Units
FVT/FVR1021
MULTIMODE
OR SINGLE MODE
OPTICAL FIBER
BLACK
INS_FVT/FVR1021_REV–
07/28/09
Page 2