Comnet MLS II 설치 매뉴얼 - 페이지 9
{카테고리_이름} Comnet MLS II에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comnet MLS II 16 페이지. Mobile radio
페이지 인쇄HOOKSWITCH
After determining the mounting
location
for
the
microphone
hookswitch, mount the hookswitch
as indicated in Figure 6. For added
strength, a plate is provided to go
on the back side of the mounting
surface.
After
mounting
the
hookswitch, connect one wire to
pin 7 of the microphone plug and
one wire to ground as shown in
Figure 6 - Hookswitch Mounting
Figure 6.
EXTERNAL SPEAKER
(OPTIONAL)
(OBSOLETE)
The speaker should be mounted where
it will direct sound to the operator, but
not interfere with his vision or provide
a hazard to passengers in case of an
accident. The speaker may be mounted
on the lower edge of the instrument
panel, on the firewall, above the
windshield in some trucks, or behind
the built in speaker grille in some
vehicles. Use the mounting bracket as a
template for locating the mounting
holes and mount the speaker bracket as
shown in Figure 7. Connect external
Figure 7 - Speaker Mounting
speaker wires to microphone plug J701
.
pins 1 and 6
9