Comnet MLS II Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Comnet MLS II. Comnet MLS II 16 pagina's. Mobile radio

Pagina afdrukken

HOOKSWITCH

After determining the mounting
location
for
the
microphone
hookswitch, mount the hookswitch
as indicated in Figure 6. For added
strength, a plate is provided to go
on the back side of the mounting
surface.
After
mounting
the
hookswitch, connect one wire to
pin 7 of the microphone plug and
one wire to ground as shown in
Figure 6 - Hookswitch Mounting
Figure 6.
EXTERNAL SPEAKER
(OPTIONAL)
(OBSOLETE)
The speaker should be mounted where
it will direct sound to the operator, but
not interfere with his vision or provide
a hazard to passengers in case of an
accident. The speaker may be mounted
on the lower edge of the instrument
panel, on the firewall, above the
windshield in some trucks, or behind
the built in speaker grille in some
vehicles. Use the mounting bracket as a
template for locating the mounting
holes and mount the speaker bracket as
shown in Figure 7. Connect external
Figure 7 - Speaker Mounting
speaker wires to microphone plug J701
.
pins 1 and 6
9