Electrolux EGG 9430 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Electrolux EGG 9430에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EGG 9430 19 페이지. Gas hob on glass and stainless steel

4. Remove burner mount retaining screws, 2 screws per burner and 4 on the wok burner (2.5mm

Torx Screwdriver required).

5. For models with a separate button ignition system, remove the switch button and ignition pack

retaining nut. Alternatively, lift the hob sufficiently to access and release the ignition leads and

battery supply cable from the ignition pack.

6. The hob may now be lifted away from the appliance.

By removing the hob the following parts are accessible for service or replacement.

• Burner mounting cups.

• Burner supply tubes.

mounting cups the nuts should be fastened with a torque of 10-12Nm.

• Manifold & Valves.

isolate and disconnect the appliance from gas supply.

Note: When fitting the burner tubes to the valves and burner

Note: To remove the manifold or valves it will be necessary to