Electrolux EGG 9430 Servicehandleiding - Pagina 8

Blader online of download pdf Servicehandleiding voor {categorie_naam} Electrolux EGG 9430. Electrolux EGG 9430 19 pagina's. Gas hob on glass and stainless steel

Pagina afdrukken

4. Remove burner mount retaining screws, 2 screws per burner and 4 on the wok burner (2.5mm

Torx Screwdriver required).

5. For models with a separate button ignition system, remove the switch button and ignition pack

retaining nut. Alternatively, lift the hob sufficiently to access and release the ignition leads and

battery supply cable from the ignition pack.

6. The hob may now be lifted away from the appliance.

By removing the hob the following parts are accessible for service or replacement.

• Burner mounting cups.

• Burner supply tubes.

mounting cups the nuts should be fastened with a torque of 10-12Nm.

• Manifold & Valves.

isolate and disconnect the appliance from gas supply.

Note: When fitting the burner tubes to the valves and burner

Note: To remove the manifold or valves it will be necessary to