comoc CM1500 V 수동 사용 및 유지 관리 - 페이지 10

{카테고리_이름} comoc CM1500 V에 대한 수동 사용 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. comoc CM1500 V 14 페이지.

OPERATION

Pull positioning lever (A) to lower the handlebar until the user's arms are at a

comfortable angle.

Push lock lever (B) down with your thumb and then

actuate the motor using the two levers (C). The lock lever must be released

every time the machine is started up. For safety purposes the motor cannot

be activated while the handlebar is in its vertical position.

The first time you use the machine you must become familiar with the

movements to impart on the handlebar in order to be sufficiently sure about

the direction the machine will move. Do not use the machine near persons or

obstacles until you have become familiar with it.

Work by performing back and forth movements and if possible going

backwards so that the operator is always standing on a floor that has not yet

been polished.

Keep the power supply cable behind the operator. Be careful not to work with

the machine near this cable in order not to damage it.

Do not work too long on the same zone in order to avoid damage to the

floor.