comoc CM1500 V 수동 사용 및 유지 관리 - 페이지 11

{카테고리_이름} comoc CM1500 V에 대한 수동 사용 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. comoc CM1500 V 14 페이지.

To remove the pad bring the handlebar up to vertical by pulling on the

positioning lever. Then tilt the machine back by resting it on the wheels. Use

the specific handle to unscrew the ring that clamps the pad in place and

remove the pad. Now unscrew the fastening screw located in the center of

the pad.

The machine must never remain resting on the pad.

In fact the weight of the machine could permanently deform the pad or the

disk and create vibrations and oscillations when working.

WARNING! Pull the plug out of the power supply outlet

before performing any type of maintenance and at the end of

the work cycle.

WARNING! Abrasive disks can be installed manually only

after pulling the power supply plug out from the power outlet

and only when wearing suitable protective gloves.

AFTER WORK IS TERMINATED