comoc CM1500 V Використання та обслуговування вручну - Сторінка 11

Переглянути онлайн або завантажити pdf Використання та обслуговування вручну для Підлогова машина comoc CM1500 V. comoc CM1500 V 14 сторінок.

To remove the pad bring the handlebar up to vertical by pulling on the

positioning lever. Then tilt the machine back by resting it on the wheels. Use

the specific handle to unscrew the ring that clamps the pad in place and

remove the pad. Now unscrew the fastening screw located in the center of

the pad.

The machine must never remain resting on the pad.

In fact the weight of the machine could permanently deform the pad or the

disk and create vibrations and oscillations when working.

WARNING! Pull the plug out of the power supply outlet

before performing any type of maintenance and at the end of

the work cycle.

WARNING! Abrasive disks can be installed manually only

after pulling the power supply plug out from the power outlet

and only when wearing suitable protective gloves.

AFTER WORK IS TERMINATED